Speed & Feed Calculator

PEEL MILL - HSM - FINISHING

These recommendations are made for High Performance carbide end mills with YG-1’s “Y” Coating, or other advanced PVD coatings (i.e., AlTiN, AlCrN, nACRo, etc.)

The recommended speeds and feeds should be used with
- an axial depth of cut equal to 2 to 4 times tool diameter (i.e., for a ½” diameter tool, take 1” up to 2” axial depth)
- and a radial depth of 8% of diameter (i.e., for a ½” diameter tool, take a 0.040’’ radial depth)
With lower radial depths equal 5%, you can increase your feed rates by 33%.

These recommendations are made for High Performance carbide end mills with YG-1’s “Y” Coating, or other advanced PVD coatings (i.e., AlTiN, AlCrN, nACRo, etc.)
The recommendations shown here may vary depending on the type of machine and conditions etc.. We do not bare responsibility for any damage that may occur.

Application Expertise Driven to Optimize Machining Performance

We serve the end user – We sell through Distribution

Our team represents more than 160 years of combined experience in solving complex machining challenges.
We have deep roots in aerospace manufacturing, as well as the automotive, energy, medical and general engineering segments, and can help you achieve maximum metal removal rates in steels, aluminum, or hard-to-machine alloys.
We cover all of California, with our headquarters in Southern California, in addition to coverage in Washington, Oregon, Arizona & Nevada.

Talk to us and you will quickly discover that Hi-Speed Corporation is an extraordinary source for production improvements through our extensive experience and best in class metalworking products.

We look forward to helping you be the best!